System Overview
20
Ultiri™ Measurement System Operation Manual – 600327583 Rev. A
Tableside Controller (TSC)
Note:
•
If the TSC is connected by USB cable, the wireless connectivity
indicator does not turn on.
•
Improper handling of the USB connection can damage the port on the
connector panel.
•
During installation, the TSC is customized to operate in a specific
room. If the TSC is removed for cleaning or adjustments, it should be
returned to the original room.
CAUTION: A yellow "no connection" Wireless Connectivity Indicator LED
means the tableside controller (TSC) is not connected to the system. Refer
to "Troubleshooting" on page 27 to reconnect.
1.
Rail clamp
1
2.
USB connection
3.
Wireless connectivity indicator
2
3