Husqvarna P 524XR EFI Operator's Manual page 74

Symbol
Note:
The symbols and the positions of the symbols
on the display can be different between different models.
Remote control
For instructions for P 524XR EFI, refer to
Troubleshooting on page 70 .
Problem
The remote control does not
start when you push the
ON/OFF button.
The remote control is set to
ON but the control functions
are off.
74
Name
Digital lock
Cause
The remote control battery is not charged.
Other error.
The hydraulic oil temperature is below 0
°C.
Shows on the display
The symbol shows.
If you cannot find a solution to your problems in this
manual, speak to your Husqvarna servicing dealer.
Troubleshooting for the remote control
If you cannot find a solution to your problems in this
manual, speak to your Husqvarna servicing dealer.
Cause
The product is locked. Unlock your
product with the Husqvarna Connect
app.
Solution
Charge or replace the remote control
battery.
Put the remote control to OFF and
stop the product. Restart the product
and the remote control after 5 seconds.
Speak to your Husqvarna servicing
dealer if the problem continues.
Operate the product in manual mode
until sufficient heat has been generated
in the hydraulic system.
1929 - 003 - 05.12.2023