Husqvarna P 524XR EFI Operator's Manual page 46

Grass cuttings around the muffler dry quickly and are a
fire risk. Use a brush or remove the grass cuttings with
water when the muffler is cold.
To clean the cold air intake of the engine
WARNING:
air intake rotates and can cause injury to
your fingers.
1. Make sure that the air intake grille is not blocked.
Remove grass and dirt with a brush.
2. Remove the engine cover.
3. Make sure that the cold air intake is not blocked.
Remove grass and dirt with a brush.
46
Stop the engine. The cold
4. Examine the air duct on the inner surface of the
engine cover. Make sure that the air duct is clean
and does not rub against the cold air intake.
To clean the hydraulic oil cooler
Make sure that the fan of the hydraulic oil cooler is not
blocked and that the area around the hydraulic oil cooler
is clean. Remove grass and dirt with a brush.
To remove the covers
To remove and install the engine cover
1. Fold the seat forward.
2. Release the 2 clips on the engine cover with the tool
attached to the ignition key.
1929 - 003 - 05.12.2023