Husqvarna P 524XR EFI Operator's Manual page 67

To lubricate the pedal system
1. Remove the 4 screws and remove the frame plate.
2. Push and release the pedals and lubricate the
moving parts with oil.
3. Lubricate the cables for the forward and rearward
drive pedals with oil.
To lubricate the parking brake cable
1. Remove the 4 screws and remove the frame plate.
2. Remove the left side cover.
3. Remove the rubber casing on the parking brake
cable.
1929 - 003 - 05.12.2023
4. Lubricate the ends of the parking brake cable with
oil.
5. Lubricate the parking brake cable with oil.
6. Press the parking brake pedal 3 times and lubricate
the parking brake cable again.
7. Attach the left side cover and the frame plate.
To lubricate the chains in the frame
tunnel
1. Remove the screws and remove the frame plate.
2. Lubricate the chain in the frame tunnel with oil or
chain lubricant spray.
To lubricate the seat slides
1. Tilt the seat forward.
2. Lubricate the seat slides with oil.
67