Husqvarna P 524XR EFI Operator's Manual page 39

3. Push the engine stop/start switch on the remote
control to the right and hold for 1 second to start the
engine.
To engage and disengage the drive of the
cutting deck
WARNING:
distance when you operate the product
with the remote control. Keep a minimum
distance of 15 m of the product when the
drive of the cutting deck is engaged. Refer
Work area safety in remote control mode
to
on page 21 .
Note:
Disengage the drive of the cutting deck when
you move the product across areas that you do not cut
grass on.
WARNING:
control out of view when the product is in
remote control mode.
• Push the PTO switch on the remote control to the
right and hold for 1 second to engage the drive of the
cutting deck.
• Push the PTO switch to the left to disengage the
drive of the cutting deck.
1929 - 003 - 05.12.2023
Stay in correct operation
Do not keep the remote
Note:
When the drive of the cutting deck is
disengaged with the PTO switch on the remote control,
the blades will stop in less than 3.5 seconds.
Note:
The drive of the blades will automatically be
disengaged when you do the following on the remote
control:
• Push the engine stop/start switch to the left.
• Push the ON/OFF button.
• Push the machine stop button.
WARNING:
the machine stop button in a slope. The
angle of the slope can cause unwanted
movement down the slope.
To operate the product with the remote control
WARNING:
product, you must read and understand
the safety chapter. Refer to
safety on page 19 .
WARNING:
see the product at all times when you
operate it with the remote control. The
operation range of the remote control makes
it possible to move the product also when
you cannot see it. Risk of injury and
damage.
WARNING:
product on a slope. The tires can loose their
grip so that the product skids.
WARNING:
cutting deck, apply the parking brake and
stop the engine before you enter the work
area.
Before you operate the product with the remote control,
align the controls on the remote control with the product.
To start the remote control mode on page 37 .
Refer to
1. Start the engine. Refer to
page 31 .
Be careful when you push
Before you operate the
Remote control
Make sure that you can
Do not start or stop the
Disengage the drive of the
To start the engine on
39