Passcode - O-Two eAdvantage User Manual

Use the Control Knob (K) to move this square frame to the particular cell
(e.g., hour, minute, day, month, year) you want to change. The green dotted
lines shown above indicate the sequence for selecting each cell based on the
rotation of the Control Knob.
At the desired cell, press the Control Knob (K) to activate this cell. The cell now
changes to a solid color as shown below.
To increase the setting, rotate the knob clockwise. Rotate it counter-clockwise
to decrease it (except for the AM/PM cell where the direction of rotation does
not matter). Press the Control Knob (K) to confi rm the change.
After making the adjustment, the cell will revert from a solid color back to being
outlined by a square frame.
To change another cell, move the frame to the next cell you wish to adjust and
repeat the above steps.
If you decide not to make any changes, or once you have completed your
adjustments, select the Cancel Button to exit this mode and return to the main
settings screen."
Note: It is important to be aware that if both the battery and power supply are
disconnected for a period exceeding 1 month, the date and time settings will
need to be reset.
In situations where the user does not confi gure the date and time after
connecting the mixer to a power supply or inserting a battery, the device will
automatically default to the following settings: 00:00 AM for time and 01/01/00
for the date.

5.4.2. Passcode

To change the Passcode, follow the steps detailed in 5.4 above under "Setting
mode" to activate its cell and do the following:
Once the "Passcode" is activated the page below will open requesting users to
enter the current passcode.
22
eAdvantage User Manual