Preparation For Use; Component List; Set Up; On/Off - O-Two eAdvantage User Manual

4. PREPARATION FOR USE

4.1 Component List

Ensure that all the following components have been received:
1. eAdvantage® mixer
2. Single-use patient circuit with mouthpiece
3. Oxygen supply hose
4. Nitrous oxide supply hose
5. External power supply with power supply cord
6. Battery pack
7. Operating manual
If any components are missing from the shipping carton, call the supplier
immediately.
4.2 Set-Up
4.2.1. Connecting the electrical power supply
The eAdvantage® mixer is supplied with a regulated power supply with the
customer-specifi ed power cord for the country of use. The power supply plugs
into the socket on the left-hand side of the unit. This socket is protected with a
dust cap when not in use. (Fig. 1)
Note: Power supply cords are available in most countries. Please specify the
country of use at the time of purchase.
Should external power be lost, the device will automatically switch to internal
battery power (providing the battery is charged) and the green battery LED on
the left of the front panel will illuminate.
Do not place this device in a position that limits access to the mains power inputs

4.2.2. Installing/replacing the battery

The battery is inserted into the battery compartment on the right side of the device
by unscrewing the yellow/black knob anti-clockwise and allowing the compartment
door to open.
The replacement of lithium batteries by personnel not specifi cally trained in the
10
WARNING
WARNING
use of this device may be hazardous
.
eAdvantage User Manual
.