O-Two eAdvantage User Manual page 12

1
Attach the N O
2
input hose here.
2
Attach the
O input hose here.
2
3
Attach a new patient
4
circuit and monitoring line
Insert power
to the device here
Supply plug here
Fig. 1 Connecting the Supply hoses, Patient Circuit, and Power Supply
WARNING
Using a wrench or applying excessive force in tightening the supply hose may
damage the seal or the thread of the connection.
Note: Power supply cords compatible with the electrical standards of most
countries are available for the eAdvantage® system. It is important to specify
the intended country of use when purchasing to ensure the correct power
supply cord is provided.
In the event of an external power outage, the device is designed to automatically
transition to its internal battery power, assuming the battery has su cient
charge. This switch to battery mode is indicated by the illumination of the green
battery LED, located on the left side of the front panel.
12
eAdvantage User Manual