Date & Time - O-Two eAdvantage User Manual

Once confi rmed, the screen will display the specifi c information related to the
selected setting. (as shown in the Passcode setting example below):
follow the instructions below to change the setting parameters.
Note: Pressing the Cancel Key at any time within the setting mode will move
the process back to a previous step until exiting the setting.
5.4.1. Date and Time
To set the Date and time, follow the steps detailed in 5.4 above under "Setting
mode" to activate the Date and Time cell and do the following:
Once the 'Date & Time' setting is activated, a yellow square frame will appear
around the hours setting window, as shown below.
21
eAdvantage User Manual