Table of Contents
Advertisement
4. PREPARATION FOR USE
4.1 Component List
Ensure that all the following components have been received:
1.
eAdvantage® mixer
2.
Single use patient circuit with mouthpiece
3.
Oxygen supply hose
4.
Nitrous oxide supply hose
5.
External power supply with power supply cord
6.
Battery pack
7.
Operating manual
If any components are missing from the shipping carton, call the
supplier immediately.
4.2 Set Up
4.2.1. Connecting the electrical power supply
The eAdvantage® mixer is supplied with a regulated power supply with
the customer specifi ed power cord for the country of use. The power
supply plugs into the socket on the left hand side of the unit. This
socket is protected with a dust cap when not in use. (Fig. 1)
Note:
Power supply cords are available for most countries. Please
specify the country of use at time of purchase.
Should external power be lost, the device will automatically switch
to internal battery power (providing the battery is charged) and the
green battery LED on the left of the front panel will illuminate.
Do not place this device in a position that limits access to the mains
4.2.2. Installing / replacing the battery
The battery is inserted into the battery compartment on the right side
of the device by unscrewing the yellow/black knob anti-clockwise and
allowing the compartment door to open.
The replacement of lithium batteries by personnel not specifi cally trained
10
WARNING
power inputs
WARNING
in the use of this device may be hazardous
.
.
eAdvantage User Manual (15PL1033 Rev. 7, July 2022)
Advertisement
Table of Contents
