Jofemar argos Series Instruction Manual page 23

PAIS
GERMANY
AUSTRIA
BELGIUM
DENMARK
SPAIN
FINLAND
FRANCE
GREECE
HOLLAND
IRELAND
ITALY
LUXEMBURG
PORTUGAL
UNITED KINGDOM
SWEDEN
If the value has programmed to zero the machine displays the price only in the
monitary unit programmed. In the others case the machine displays first the price in
the monetary unit programmed and after the machine displays the price in euro.
OP_31 PROGRAMMING EXTERIOR CHANGER TUBES.
Pressing refund makes the return tubes that are connected appear on the display.
RET. TUBE. EXT.1
COD. XX YY ZZZ
is the
Programming the coin code:
By pressing button 1, you change the code of the coin programmed.
OP_33 DISPLAYING THE MACHINE TYPE.
Pressing refund makes the currently programmed machine type appear. It can not be
programmed.
OP_34 PROGRAMMING THE MESSAGE.
Pressing refund in the first line the massage "PROG. MASSAGE" appears and in the
second line the earlier programmed massage.
A total of 80 characters can be programmed.
In order to programme a new message, you use the following buttons:
- Button 1: Selects a character in upwards option.
- Button 2: Selects a character in downwards option.
- Button 3: Deletes the character on which the cursor is placed. If you keep
this button pressed down, you will delete the characters placed in front of it.
- Button 4: Moves the cursor forwards through the characters of the
message.
- Button 5: Moves the cursor backwards through the characters of the
message.
When the desired message appears on the display, by quitting option 34 by means of
the programming button, the message is recorded.
MNP45GBV02
DEM
ATS
BEF
DKK
ESP
FIM
FRF
GRD
NLG
IEP
ITL
LUF
PTE
GBP
SEK
where xx is the coin code, yy is the coin value and zzz
monetary unit.
27/03/04 Rev. 1
TIPO DE CONVERSION
X,XXXXX
XX,XXXX
XX,XXXX
X,XXXXX
XXX,XXX
X,XXXXX
X,XXXXX
XXX,XXX
X,XXXXX
0,XXXXX
XXXX,XX
XX,XXXX
XXX,XXX
0,XXXXX
X,XXXXX
Page 23 of 40