Jofemar argos Series Instruction Manual page 18

When the message "PRESS BUTTON TO CREATE LINK" appears on the display
and refund is pressed, the message "PRESS BUTTON TO DISPLAY UNION"
appears. At this point you can verify manually whether or not the option has been
correctly programmed. For this purpose, all you have to do is press the button you
wish to verify, the numbers of the buttons and of the extractors that this button is
linked to appear on the display. When you quit this option, a check is made of the
column link. If the link is incorrect, the error detected will appear on the display.
The following errors may appear:
- "EXTRACTOR xx IN TWO GROUPS"
- "BUTTON xx IN TWO GROUPS"
- "BUTTON GROUP xx WITHOUT EXTRACTOR"
- "BUTTON xx WITHOUT EXTRACTOR"
- "BUTTON GROUP xx ERROR IN PRICES"
- "EXTRACTOR xx NOT PROGRAMMED"
"xx" is the extractor or button. In the case of "BUTTON LINKED IN BUTTON GROUP
XX", xx is the first button to form the group.
If any error appears, press refund in order to enter into OP_9 again.
OP_10 INHIBITING COINS.
When refund is pressed the following message appears: "COIN 01 5PTS TO BE
ACCEPTED". Pressing button 1 changes the status of the coin that appears on the
display (TO BE ACCEPTED, or INHIBITED).
Pressing button 2 moves you on to the next coin programmed.
Options OP_11 , OP_15, OP_16 will be active if option OP_17 is programmed in
sales mode without an escrow unit or escrow only moving towards the cash
box.
If the coin mechanism is programmed for not giving change, OP _ 11 will not
appear and OP _ 16 only appears, if the vend mode programmed under option
15 is MULTIPLE SALE.
OP_11 REFUND OPTION.
By pressing refund you choose one of the two possible options.
- "POSSIBLE REFUND": The money can be returned if there is enough change
in the tubes.
- "OBLIGATORY SALE": Money cannot be returned after a purchase has been
made.
OP_15 SALE OPTION.
By pressing refund you choose one of the three possible options:
If this option is activated, the machine only accepts coins when the coin mechanism
is able to return the coins.
"SINGLE SALE": The machine will only sell the product if it can give the full
change, otherwise it will not make a sale and the money can be returned. When
the machine has no change available, it will only accept the coins which go to
the change tubes and it will accept coins until the maximum price is reached.
If the coin mechanism is programmed for not giving change, the sale will be
done if the exact price has been reached.
MNP45GBV02 27/03/04 Rev. 1 Page 18 of 40