Jofemar argos Series Instruction Manual page 19

"MIXED SINGLE SALE": when a sale is made, change is given automatically if
the machine have sufficient coins. Otherwise the change will maintained on the
display for future sales. The machine will accept coins until the maximum price
is reached.
If the coin mechanism is programmed for not giving change, the vend is done
with overpay (The machine keeps the overpay.)
"MULTIPLE SALE": after a , the credit is left on the display so that further sales
may be made, or for refund to be pressed and the change obtained. The
machine will accept coins until the maximum refund is reached (OP_16).
If the coin mechanism is programmed for not giving change, the credit will be
maintained on the display for future sales.
NOTE: The credit introduced is maintained indefinitely, in any of the options, until
refund is pressed.
OP_16 MAXIMUM REFUND.
In this option, the maximum value of change to be returned in single sale and single
mixed sale is programmed, as is the value of the maximum acceptance of credit in
multiple sale.
By pressing refund, the display shows the currently programmed value. Pressing
refund once again the value is set at a value which is equal to the maximum and
successively pressing column 1 or column 2 increases this by either small or large
values. If the same column is held down, it will increase quickly.
If the coin mechanism is programmed for not giving change, the maximum
acceptance of credit is limited, when the sales option is programmed as MULTIPLE
SALE.
OP_17 ESCROW UNIT.
You may choose among 3 possibilities. In order to shift from one to another, press
refund. "SALE WITH ESCROW", "SALE, ESCROW ONLY TURNS TOWARDS CASH
BOX" or "SALE WITHOUT ESCROW".
If this option is programmed in sale mode WITH ESCROW the machine will accepts
coins until the maximum price is reached and will only sell the product if it can give
the full change.
ESCROW UNIT TURNS TOWARDS
OP_16 are activated.
If the coin mechanism is programmed for not giving change, only SALE WITH
ESCROW or SALE WITHOUT ESCROW can be programmed.
OP_20 PRODUCTS AND MACHINE CODES.
Product code:
By pressing the relevant button, the current four digit product code appears. By
pressing button 1 you move the cursor forwards and when 2 is pressed each of the
digits is increased. Once the product code is programmed it can be used for other
channels with the same product by pressing button 6. Then the massage "PRESS
BUTTON WITH CODE XXXX" (the chosen code) will appear on the display. Now you
simply have to press the buttons you want to have with the same product codes.
For the same code to accepted for one or various buttons press refund. Pressing
refund once again the code is confirmed.
MNP45GBV02
If it is programmed in sales mode WITHOUT ESCROW or
27/03/04 Rev. 1
CASH BOX, options OP_11, OP_15 and
Page 19 of 40