Programming Codes - Jofemar argos Series Instruction Manual

5.1. - Programming Codes.

OP_0 PROGRAMMING PRICES.
When the refund button is pressed, the following message appears on the display
"PRESS CHANNEL TO CHANGE PRICE".
Press the according channel of whichever product column you wish to change the
price of, and the CHANNEL No. and "CURRENT PRICE" appear on the screen. In
order to modify the price, by pressing the following buttons, the following changes are
achieved:
- Button 1: increases the current price by multiples of 5.
- Button 2: increases the current price by multiples of 25.
- Button 3: decreases the current price by multiples of 5.
- Button 4: decreases the current price by multiples of 25.
- Button 5: the current price becomes the basic coin price.
Once the correct price has been reached, press button 6 if you wish to place the
same price on further channels. The following message appears on the display
"PRESS CHANNELS WITH PRICE XX" (the price you have chosen) and the channels
which are to bear the same price should then be pressed. For confirmation of one or
several channels, the refund button must be pressed.
OP_1 AUDIT OF PRODUCT.
In order to move from one option to another, press refund and the following messages
will gradually appear on the screen:
- "PARTIAL SALES PER CHANNEL, PRESS A BUTTON" When a channel
is pressed, the number of sales made from the according column appears
on the screen.
- "PARTIAL SALES LOST PER CHANNEL, PRESS A BUTTON" Works in
the same way as the previous option.
- "TOTAL SALES PER CHANNEL, PRESS A BUTTON". When a channel is
pressed, the counting of the according column is shown from the time when
the machine was installed.
- "TOTAL SALES LOST PER CHANNEL, PRESS A BUTTON" Works in the
same way as the previous option.
In case of the machine being programmed with linked channels (OP _ 09) in the
following four product counts pressing any of the channels connected will show the
sum of all the vends connected to this or these button or buttons. Reaching a total of
49.999 sales it is automatically set at zero again.
In the following product counts reaching a total of 9.999.999 sales it is automatically
set at zero again.
For the following three options, the total values of vends may be obtained by pressing
channel 1. By pressing channel 2, the partial values of vends are obtained.
- "TOTAL SALES" The total amount of sales made for all the channels
appears.
- "SALES VALUE" The total value of sales made by the machine since
start-up appears.
- "MONEY IN THE BOX" The total amount of money sent to the cash box
appears.
MNP45GBV02 27/03/04 Rev. 1 Page 14 of 40