2
Front and Rear Panel Interfaces
SIGNAL (INPUT)
This connector accepts the input (device under test) signal.
Limits
• Frequency: 5 MHz to 1600 MHz
Characteristics
• Input impedance: 50 Ω, nominal
SRQ (GPIB)
The service request LED illuminates when the instrument requests service.
TLK (GPIB)
The talk indicator LED illuminates when the system addresses the instrument
to talk.
TUNE VOLTAGE
The signal at this connector is the ouput to the VCO's (voltage controlled
oscillator's) tune port connector.
Characteristics
• Input impedance: 50 Ω, 20 mA max
µW SIGNAL
This connector accepts the microwave input (device under test) signal.
Limits and characteristics
• Level range (microwave phase detector): 0 to +5 dBm
• Frequency: 1.2 to 26.5 GHz
• Input impedance: 50 Ω, nominal
24
Agilent N5500A Hardware Reference