Keysight Technologies Agilent N5500A Instruction Manual page 39

Table 14 Cleaning Supplies Available from Agilent
Product
Aero-Duster
Isopropyl alcohol
Lint-Free cloths
Small polyurethane swabs
Cleaning connectors with alcohol should only be performed with the
WARN IN G
instruments' mains power cord disconnected, in a well ventilated area.
Connector cleaning should be accomplished with the minimum amount of
alcohol. Prior to connector reuse, be sure that all alcohol used has dried, and that
the area is free of fumes.
If flammable cleaning materials are used, the material should not be stored, or
WARN IN G
left open in the area of the equipment. Adequate ventilation should be assured to
prevent the combustion of fumes, or vapors.
Agilent N5500A Hardware Reference
Part Number
8500-6460
8500-5344
9310-0039
9301-1243
Preventive Maintenance
4
39