4
Preventive Maintenance
Benchtop instrument
To install an instrument in a benchtop system
1 Make sure the system is powered off.
2 Connect all cables to the instrument (front
3 Connect the power cord to the AC power
4 Power on the system.
5 Set the instrument GPIB address, if
46
and rear), including the power cord.
source.
necessary.
•
For details, see For details, see the system
installation guide or system user's guide.
•
For details, see the system installation guide
or system user's guide.
•
For procedures, see the system installation
guide or system user's guide.
Agilent N5500A Hardware Reference