Power Connector (~ Line); Track Gen In; Tune Voltage Out - Keysight Technologies Agilent N5500A Instruction Manual

2
Front and Rear Panel Interfaces
• Bandwidth: 100 kHz

Power Connector (~ LINE)

This is the connection for the AC power cord. The detachable power cord is the
test set's disconnecting device. It disconnects the mains circuits from the
mains supply before other parts of the instrument or system. For information
on power requirements, see the specifications chapter.

TRACK GEN IN

This connector accepts the signal from the tracking generator of a baseband
analyzer.

TUNE VOLTAGE OUT

The signal at this connector is the ouput to the VCO's tune port connector. This
Tune Voltage Output port is the default at power-up.
26 Agilent N5500A Hardware Reference