Option 001 Front-Panel Interfaces; 50 Khz-1600 Mhz (Ref Input) - Keysight Technologies Agilent N5500A Instruction Manual

2
Front and Rear Panel Interfaces
Option 001 Front-Panel Interfaces
This section describes the function of the front-panel interfaces on the N5500A
test set with Option 001. The interfaces appear in alphabetical order.
n5500a_opt001_front_pnl
26 Mar 04 rev 1
Figure 3
Some interfaces on the front and rear panels are not used for phase noise measurement, as
NO T E
their descriptions indicate. Their primary function is for factory testing and troubleshooting.

50 kHz-1600 MHz (REF INPUT)

This connector is a reference signal input to the RF phase detectors.
Limits
• Level range: +15 to +23 dBm
• Frequency: 50 kHz to 1600 MHz
Characteristics
• Input impedance: 50 Ω nominal
• AC coupled: +15 VDC Max
16
N5500A Opt 001
Test Set
RMT LSN TLK SRQ
INPUT
SIGNAL INPUT SIGNAL NOISE
0 V DC MAX
MAXIMUM POWER
50 kHz -1600 MHz
+ dBm + ATTEN
23
1.2 GHz- 26.5 GHz
50
+ +
10 dBm ATTEN
1 V Pk
+ dBm MAX WITH
30
ATTENUATOR 50 kHz - 26.5 GHz 0.01 Hz - 100 MHz
PHASE DET OUTPUT
RF ANALYZER MONITOR
POSSIBLE
OUTPUT POWER
+ dBm
30
ANALYZER ANALYZER
< kHz < MHz
100 100
POWER
N5500A Option 001 front panel
GPIB
STATUS
ACT ERR
REF INPUT
50 kHz - 1600 MHz 1.2 - 26.5 GHz
+ dBm MIN + dBm MIN
15 7
FROM TO
DOWNCONVERTER DOWNCONVERTER
TUNE VOLTAGE
OUT OF LOCK
50 20 mA MAX
MAXIMUM POWER
50 kHz -1600 MHz
+ dBm
23
1.2 -26.5 GHz
+ dBm
10
Agilent N5500A Hardware Reference