Table of Contents
Advertisement
3
Technical Data
Specifications
This section contains general specifications for the N5500A test set. It also
includes data on system phase noise and spurious response levels, and the
frequency and amplitude ranges for the phase detector input ports.
Table 1
Altitude
Operating temperature range
Warm-up time
Max relative humidity
Height
Width
Depth
Weight
Table 2
Voltage range
Current
Output impedance
Table 3
Frequency
Amplitude
Input impedance
Table 4
Degrade system noise floor 1 dB for every dB
reduction in R input levels less than:
The N5500A has low susceptibility to RFI and mechanical vibration. Care must be exercised,
NO T E
however, in making measurements in high RFI or mechanical vibration environments as
spurious signals may be induced in the instrument.
28
Environmental and mechanical specifications
Tuning voltage output
Noise input port
Noise floor degradation
Up to 2,000 meters (6,500 ft)
+0 °C to +45 °C (41 °F to 110 °F)
20 minutes
80% for temperatures up to 31 °C, decreasing linearly
to 50% relative humidity at 40 °C.
177.2 mm (7 in)
212.5 mm (8.4 in)
574.3 mm (22.6 in)
~ 30 lbs (13.6 kg)
±10 V, open circuit
20 mA, max
50 Ω, typical
0.01 Hz to 100 MHz
1 V peak, max
50 Ω, typical (DC coupled, RL < 9.5 dB)
+15 dBm (low frequency input)
Agilent N5500A Hardware Reference
Advertisement
Table of Contents
