Control Cabinet Installation; Fig. 10 Dimensions - Beckhoff CP6706-0001 Manual

Commissioning
4.2

Control cabinet installation

Extreme environmental conditions
Extreme environmental conditions can cause damage to the device.
• Avoid extreme environmental conditions.
• Protect the device against dust, moisture and heat.
Lack of air circulation
Incorrect installation of the device prevents air circulation in the device and thus causes overheating and
impaired functioning.
• Only install the device in the corresponding wall in the orientation shown.
The device is designed for installation in the front of a control cabinet in machine and system engineering.
The environmental conditions specified for operation must be observed.
Dimensions
The dimensions are used to prepare the control cabinet front and to ensure correct installation of the panel
PC in the control cabinet front.
All dimensions are in mm.
Figure 10 shows the dimensions of the panel PC without push button extension.
200
Fig. 10: Dimensions
Figure 11 shows the dimensions of the panel PC with push button extension.
20
NOTICE
NOTICE
57,5
7
6
Version: 2.0
191
CP6706-0001