Table of Contents
Advertisement
11.6.2
Forcing cooling
11.6.3
Periods of absence or going on holiday
Tab.52
Parameter
Start date holiday
End date holiday
Wished room temperature during holiday
Reset
11.7
Monitoring the energy consumption
Tab.53
Parameter
Cooling consumed
DHW consumed
CH consumed
7856310 - v02 - 21122023
3. Select the desired value:
Your appliance will automatically switch to cooling mode when the outdoor
temperature exceeds 22 °C (factory setting). However, you can force
cooling mode at any time, regardless of the outdoor temperature.
1. Select the
2. Select Force summer mode.
3. Select On.
If you will be absent for several weeks, you can reduce the room
temperature and domestic hot water temperature in order to save energy.
To do this, activate the Holiday operating mode for all zones, including for
domestic hot water.
1. Select the
2. Set the following parameters:
Description
Set the date and time for the start of the absence period.
Set the date and time for the end of the absence period.
Set the desired room temperature for the absence period
Restart or cancel the holiday programme
If your installation is equipped with an energy meter, you can monitor your
energy consumption.
1. Select the
Description
Energy consumed for cooling (kWh)
Energy consumed for domestic hot water (kWh)
Energy consumed for central heating (kWh)
2. To reset the meters to zero, select Réinitialiser la consommation
énergétique.
Off to stop the heating/cooling function.
On to switch the heating/cooling function on again.
icon.
Holiday Mode icon.
Heat Pump icon.
23.5
The energy consumed since the last energy consumption meter
reset is displayed:
11 Operation
69
Advertisement
Table of Contents
