Selecting The Operating Mode; Defining A Constant Room Temperature; Configuring And Activating A Timer Programme For The Heating; Activating And Configuring A Timer Programme For Cooling - Baxi MK SYSTEM Installation, User And Service Manual

11 Operation
11.4.1

Selecting the operating mode

11.4.2

Defining a constant room temperature

11.4.3

Configuring and activating a timer programme for the heating

Fig.57
14 : 23 Zo.. Zone setup: ... Heating Schedule
Monday
6:00 Comfort 20.0°C
22.00 Reduce 16.00°C
Edit schedule entry
6:00 Comfort 20.0°C
Add time and Activity
Copy to other day
Set activity temperatures
11.4.4

Activating and configuring a timer programme for cooling

66
1. Select the icon for the affected zone,
2. Select Operating mode.
3. Select the desired operating mode.
Manual mode is used to define a constant temperature in a selected zone.
1. Select the icon for the affected zone,
2. Select Operating mode.
3. Select Manual.
4. Set the desired temperature for the zone.
5. Select Confirm.
A timer programme can be used to vary the room temperature in a living
zone depending on activities during the day. This can be programmed for
each day of the week.
1. Select the icon for the zone to be programmed,
Information on the current operating mode is given in the upper part
of the screen.
2. Select Time programs heating.
3. Select the timer programme to be configured: Schedule 1 or Schedule
2 or Schedule 3
The programmed activities for Monday are displayed.
The last activity of the day remains active until the first activity of the
following day.
4. Select the day to be modified.
5. Carry out the following actions according to your needs:
Modify the timings for programmed activities.
Add a new time range.
Delete a programmed activity (choose the "Delete" activity).
MW-5000770-04
Copy programmed daily activities to other days.
Modify temperatures linked to an activity.
6. Then select Time programs heating > ZoneTimeProg Select to choose
the timer programme to be activated.
If your installation is configured to allow cooling, the corresponding timer
programme can be modified in Cooling mode.
Important
Your appliance will automatically switch to cooling mode when the
outdoor temperature exceeds 22 °C (factory setting).
1. Select the icon for the zone to be programmed,
Information on the current operating mode is given in the upper part
of the screen.
2. To activate the timer programming or to change the timer programme,
select Time programs cooling.
3. Select the timer programme to be activated.
Information on the active timer programme is given in the upper part
of the screen.
, for example.
, for example.
, for example.
, for example.
7856310 - v02 - 21122023