Table of Contents
Advertisement
Signals
Auto/Derog DHWstatus
DM009
DHW activity
DM019
DHW setpoint
DM029
DHW active
AM001
Tab.37
> Counters
Meters
DHW valve cycles
DC002
Number of hours during which the
diverting valve is in DHW position
DC003
DHW starts
DC004
DHW run hours
DC005
9.1.4
> Outdoor sensor setup > Parameters, counters, signals
Tab.38
> Settings
Parameters
Description of the parameters
Outdoor sensor
Enable outdoor sensor
AP056
No outdoor sensor
AF60
QAC34
Summer Winter
Outdoor temperature; Upper limit for heating
AP073
Can be set from 10 °C to 30.5 °C in increments of 0.5 °C
When set to 30.5 °C, automatic switching is deactivated, the system remains in
Winter mode and heating is active.
Force summer mode
The heating is stopped, Hot water is maintained, Force summer mode
AP074
Off
On
Season cross-over
Temperature variance from set outdoor upper temp limit in which the generator
AP075
will not heat or cool
Can be set from 0 °C to 20 °C
Building Inertia
Inertia of the building used for heat up speed
AP079
Can be set from 0 to 10
0: 10 hours for a building with low thermal inertia,
3: 22 hours for a building with normal thermal inertia,
10: 50 hours for a building with high thermal inertia.
Only modify the factory setting if the inertia of the building is known.
7856310 - v02 - 21122023
Description of the signals
Automatic/derogation status of Domestic Hot Water mode
Scheduling
Manual
Off
Temporary
Domestic Hot Water current activity
Off
Eco
Comfort
Anti legionella
Domestic Hot Water temperature setpoint in °C
Is the appliance currently in domestic hot water production mode?
Off
On
Description of the meters
Numbers of Domestic Hot Water diverting valve cycles
Number of hours during which the diverting valve is in DHW position
Number of compressor start-ups during domestic hot water production
Number of compressor start-ups
9 Parameters
Factory setting
CIRCA
AF60
22°C
Off
4 °C
3
51
Advertisement
Table of Contents
