Table of Contents
Advertisement
72
|
Message
SSG Data Er
SSG Dose Err
SSG Fill Err
SSG HW Err
SSG Missing
SSG Rsvr Err
Basin In Use
Task Unfin
Time Err
Water T High
Water T Low
Description
Alarm indicating that the SSG Database was out of range. DSD and SSG data do not
match.
Alarm indicating that the SSG is not indicating completion prior to DSD step advancing
(SSG lost database or program step error)
Alarm indicating that the DSD has advanced to the next step prior to SSG fill
completion (program step error)
Alarm indicating that the SSG has experienced a hardware error (includes capacitive
sensor missing)
Alarm indicating the DSD detected a failure in the SSG Communication (DSD doesn't
see the SSG)
Alarm indicating that an SSG dosing reservoir sensor has remained high (not empty)
after disinfect cycle
Indicates that the selected operation cannot be performed because the station is not
currently idle
Alarm indicating that the SSG is reporting a Task Not Finished Error; fill or dose did not
complete
Time base error, can only be cleared in Diagnostics 70
Incoming water temperature exceeding maximum allowed
Incoming water temperature lower than minimum allowed
Advertisement
Table of Contents
