Table of Contents
Advertisement
52
|
PRINT LAST RUN
Print a copy of the log for the last disinfection cycle run.
1. Verify the printer is ON.
2. On the control panel, verify the correct station is selected.
If necessary, press STATION SELECT to choose the
station (A or B).
3. Press SETUP.
4. Type 25 on the keypad, then press ENTER. "Print Run?"
displays on the screen.
5. To print the log, press START.
6. To exit, press SETUP.
CANCEL PRINT RUN
Clear the print queue of all data. Clearing the queue will stop the print function. There is approximately a 15 second
delay before printing will stop.
1. On the control panel, verify the correct station is selected.
If necessary, press STATION SELECT to choose
the station (A or B).
2. Press SETUP.
3. Type 22 on the keypad, then press ENTER.
"Clear Print Queue?" displays on the screen.
4. To clear the print queue, press ENTER.
5. To exit, press SETUP.
Figure 6.10 - Print Last Run
Figure 6.11 - Cancel Print Run
Advertisement
Table of Contents
