Indications For Use; Safety; Facility Requirements; Operator Safety - Cantel Medical MEDIVATOR DSD EDGE User Manual

Automated endoscope reprocessor
Table of Contents

Advertisement

INDICATIONS FOR USE

DSD EDGE™ Reprocessor tests, washes, disinfects and rinses flexible endoscopes, such as fiberoptic and video
endoscopes, between patient uses. The DSD EDGE Reprocessor is indicated to provide high-level disinfection,
using RAPICIDE™ PA High-Level Disinfectant, of heat-sensitive semi-critical endoscopes. Manual cleaning of
endoscopes is required prior to placement in the DSD EDGE Reprocessor.

SAFETY

This section outlines general safety guidelines for proper operation and service of the reprocessor.
Warning! Failure to follow these guidelines may result in severe injury or death
to the patient and/or operator. Read and understand all operating and service
procedures before attempting to operate the reprocessor. If the equipment is not
used as specified, protection by the equipment may be impaired.

FACILITY REQUIREMENTS

Only properly trained individuals may operate or service the reprocessor.
Never use the reprocessor for any purpose other than the manufacturer's specific intended purpose.
It is the responsibility of the facility to maintain and ensure that adequate training is provided to operators.
It is recommended that the facility conduct regular training of all personnel concerned with the operation and
maintenance of this equipment, including emergency procedures for toxic, flammable or pathogenic material
released into the environment.
Attendance records of the training should be maintained and evidence of understanding demonstrated.

OPERATOR SAFETY

Warning! To avoid biological contamination and/or chemical burns,
always wear appropriate personal protective equipment when handling
endoscopes or disinfectant solutions.
Warning! Never open the reprocessor lid or remove the floating basin lid
during operation.
|
7

Advertisement

Table of Contents
loading

Table of Contents