Environmental Requirements - Huawei UPS2000-A-1KTTS User Manual

Hide thumbs Also See for UPS2000-A-1KTTS:

Table of Contents

UPS2000-A-(1 kVA-3 kVA)

User Manual

●

1.4 Environmental Requirements

Do not expose the equipment to flammable or explosive gas or smoke. Do not

perform any operation on the equipment in such environments.

Do not store any flammable or explosive materials in the equipment area.

Do not place the equipment near heat sources or fire sources, such as smoke,

candles, heaters, or other heating devices. Overheat may damage the equipment

or cause a fire.

Install the equipment in an area far away from liquids. Do not install it under

areas prone to condensation, such as under water pipes and air exhaust vents, or

areas prone to water leakage, such as air conditioner vents, ventilation vents, or

feeder windows of the equipment room. Ensure that no liquid enters the

equipment to prevent faults or short circuits.

Issue 17 (2024-01-30)

Figure 1-2 Wearing an ESD wrist strap

When holding a board or a module with exposed circuit boards, hold its edge

without touching any components. Do not touch the components with bare

hands.

Package boards or modules with ESD packaging materials before storing or

transporting them.

D ANGER

WARNING

1 Safety Information

Table of Contents