Huawei UPS2000-A-1KTTS User Manual page 57

Hide thumbs Also See for UPS2000-A-1KTTS:

Table of Contents

UPS2000-A-(1 kVA-3 kVA)

User Manual

Button

SELECT

Issue 17 (2024-01-30)

5 Setting Control Panel

Function

● Setting mode:

– When the UPS is in standby

mode or bypass mode, hold

down the SELECT button for 5s

to enter UPS setting mode. In

this case, all parameters can be

set. In setting mode, press the

ON/MUTE button or the SELECT

button to switch parameters.

Release the button for more

than 10s to restore the default

display.

– When the UPS is in normal or

battery mode, if you hold down

the SELECT button for 5s, only

parameter 11 (buzzer off

enabled/disabled) can be set.

● Next option: In UPS setting mode,

hold down the SELECT button for

more than 3s to go to the next

option after hearing a beep sound.

● In normal mode, press the SELECT

button twice and release the button

within 3s each time. Then you can

view the input, output, and battery

information.

Table of Contents