Huawei UPS2000-A-1KTTS User Manual page 78

UPS2000-A-(1 kVA-3 kVA)
User Manual
Alar Caus Nam
m ID e ID e
66 4 Outp
ut
overl
oad
158 1 On
bypa
ss
Issue 17 (2024-01-30)
Seve Clear Trigger
rity ance Condition
Mod
e
transfers
to no
output
mode.
Critic This The bypass
al alarm overload
must exceeds the
be time limit.
manu
ally
cleare
d.
Mino The The UPS
r alarm transfers to
is bypass mode.
auto
matic
ally
cleare
d.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Impact on the Solution
System
The UPS Possible cause: The
transfers to no load exceeds the rated
output. load capacity of the
bypass.
Measure: Lower the
load or replace the
UPS with a larger-
capacity UPS.
The UPS ● Possible cause: The
transfers to
bypass mode.
● Measure: Check
● If an alarm is
● Possible cause: The
● Measure: Lower the
5 Setting Control Panel
inverter is not
started.
whether other
alarms are reported.
generated, clear the
alarm by referring
to the handling
procedure. If no
alarm is generated,
start the UPS
manually.
load exceeds the
rated load capacity
of the inverter.
load or replace the
UPS with a larger-
capacity UPS.
71