Huawei UPS2000-A-1KTTS User Manual page 14

Hide thumbs Also See for UPS2000-A-1KTTS:

Table of Contents

UPS2000-A-(1 kVA-3 kVA)

User Manual

Before installing and commissioning batteries, prepare fire fighting facilities, such

as fire sand and carbon dioxide fire extinguishers, according to construction

standards and regulations. Before putting the battery room into operation, ensure

that it is equipped with a fire extinguishing system that complies with local laws

and regulations, has been constructed and commissioned, and can work in

automatic or manual control mode.

Before unpacking, storage, and transportation, ensure that the packing cases are

intact and correctly placed according to the labels on the packing cases. Do not

place a battery upside down or vertically, lay it on one side, or tilt it. Stack the

batteries according to the stacking requirements on the packing cases. Ensure that

the batteries do not fall or get damaged. Otherwise, they will need to be scrapped.

After unpacking batteries, place them in the required direction. Do not place a

battery with its front panel facing upwards, put it upside down, tilt it, or stack it.

Ensure that the batteries do not fall or get damaged. Otherwise, they will need to

be scrapped.

Tighten the screws on copper bars or cables to the torque specified in this

document. Periodically confirm whether the screws are tightened, check for rust,

corrosion, or other foreign objects, and clean them up if any. Loose screw

connections will result in excessive voltage drops and batteries may catch fire

when the current is high.

After batteries are discharged, charge them in time to avoid damage due to

overdischarge.

If the electrolyte leaks, absorb and neutralize the electrolyte immediately. Exercise

caution when moving or handling a lead-acid battery with electrolyte leakage to

avoid electrolyte hazards.

Issue 17 (2024-01-30)

WARNING

1 Safety Information

Table of Contents