Huawei UPS2000-A-1KTTS User Manual page 63

UPS2000-A-(1 kVA-3 kVA)
User Manual
Display
●
Display
The DHCP function setting, IP address display, subnet mask display, and gateway
display are available only when an SNMP card is configured. If no SNMP card is
connected, default values are displayed for the IP address, subnet mask, and
gateway. If an SNMP card is connected, the IP address, subnet mask, and gateway
need to be set on the WebUI of the SNMP card.
●
Display
Issue 17 (2024-01-30)
Automatic startup setting
NO TICE
DHCP function setting
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Setting Control Panel
Setting
Enable or disable the buzzer off
function:
ENA: The buzzer is muted.
DIS: The buzzer is unmuted (default).
Setting
Automatic startup upon power-on:
ENA: The function of automatic
startup upon power-on is enabled.
DIS: The function of automatic startup
upon power-on is disabled (default).
Remarks
Set the address allocation mode:
ENA: enabled
DIS: disabled (default)
56