2.1.3 LED Indications
LED Definition:
System and Power
LED
Color
PWR 1
Green
PWR 2
Green
Alarm
Red
Per 10GBASE-T RJ45 Interface
LED
Color
1G/100
Green
10G
Amber
2.5G/5G
Green
Per 10GBASE-X SFP+ Interface
LED
Color
100/1G/2.5G
Green
LNK/ACT
10G
Amber
LNK/ACT
Lit
Power ON
Off
Power OFF
Lit
Power ON
Off
Power OFF
Lit
Indicating power failure or port problem.
Off
No failure
Lit:
To indicate the link through TP port is successfully established at 1Gbps or 100Mbps.
Blink To indicate that the media converter is actively sending or receiving data over that port.
Lit:
To indicate the link through TP port is successfully established at 10Gbps.
Blink To indicate that the media converter is actively sending or receiving data over that port.
To indicate that the port is operating at 5Gbps or 2.5Gbps.
Lit:
Blink To indicate that the media converter is actively sending or receiving data over that port.
Lit:
To indicate the port is running in 100/1G/2.5Gbps speed and successfully established.
Blink To indicate that the Media converter is actively sending or receiving data over that port.
Lit:
To indicate the port is running in 10Gbps speed and successfully established.
Blink To indicate that the media converter is actively sending or receiving data over that port.
User's Manual of IXT-900 Series
Function
Function
Function
23