Switching - Planet IXT-900 Series User Manual

4.3 Switching

Use the Port Menu to display or configure the Managed Media Converter's ports. This section has the following items:
4.3.1 Port Management
■ Port Configuration
■ Port Counters
■ Link Fault Passthrough
■ Jumbo Frame
■ Protected Port
■ EEE
■ SFP Module Status
■ SFP Module Detail Status
4.3.2 VLAN
■ Management VLAN
■ Create VLAN
■ Interface Settings
■ Port to VLAN
■ Port VLAN Membership
4.3.3 LLDP
■ LLDP Global Setting
■ LLDP Port Setting
■ LLDP Local Device
■ LLDP Remote Device
■ LLDP Statistics
4.3.4 MAC Address Table
■ Dynamic Learned
■ Dynamic Address Setting
■ Static MAC Setting
■ MAC Filtering
Configures port configuration settings.
Lists Ethernet and RMON port statistics.
Link fault detection and propagation
Sets the jumbo frame on the media converter.
Configures protected ports settings.
Configures EEE settings.
Displays SFP module information.
Displays SFP module information.
Configures the management VLAN.
Creates the VLAN group.
Configures mode and PVID on the VLAN port.
Configures the VLAN membership.
Display the VLAN membership.
Configure LLDP global settings on this page.
Configure LLDP port settings on this page.
Configure LLDP local device settings on this page.
Configure LLDP remote device settings on this page.
Provide LLDP statistics on this page.
Provide dynamic learned information of whole Ethernet interfaces on
this page.
Provide aging time setting on this page.
Provide static MAC address setting on this page.
Provide MAC address filtering setting on this page.
87
User's Manual of IXT-900 Series