Installing The Sfp Transceiver - Planet IXT-900 Series User Manual

2.3.1 Installing the SFP Transceiver

The sections describe how to insert an SFP/SFP+ transceiver into an SFP/SFP+ slot. The SFP/SFP+ transceivers are
hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP/SFP+ port without having to power
down the Industrial 10G Managed Media Converter as follows.
 Approved PLANET SFP/SFP+ Transceivers
PLANET Industrial 10G Managed Media Converter supports both single mode and multi-mode SFP transceivers. The
following list of approved PLANET SFP/SFP+ transceivers is correct at the time of publication:
10 Gigabit Ethernet Transceiver (10GBASE-X SFP+)
Speed
Model
(Mbps)
MTB-RJ 10G
MTB-SR 10G
MTB-SR2 10G
MTB-LR 10G
MTB-LR20 10G
MTB-LR40 10G
MTB-LR60 10G
Connector
Fiber Mode
Interface
RJ-45 Copper
LC Multi Mode
LC Single Mode
LC Single Mode
LC Single Mode
LC Single Mode
LC Single Mode
User's Manual of IXT-900 Series
Wavelength
Distance
(TX)
30m N/A
300m 850nm
2km 1310nm
10km 1310nm
20km 1310nm
40km 1310nm
60km 1310nm
28
Wavelength Operating
(RX) Temp.
0 ~ 60°C
0 ~ 60°C
0 ~ 60°C
0 ~ 60°C
0 ~ 60°C
0 ~ 60°C
0 ~ 60°C