Switch Upper Panel - Planet IXT-900 Series User Manual

2.1.4 Switch Upper Panel

The Upper Panel of the Industrial Media Converter comes with a DC inlet power socket and one terminal block connector with
6 contacts.
Insert positive/negative DC power wires into contacts 1 and 2 for DC Power 1, or 5 and 6 for DC Power 2.
1.
Tighten the wire-clamp screws for preventing the wires from loosening.
Model Name
IXT-900-1X1T
IXT-900-2X
IXT-900-2X1T
IXT-900-2X1PD
1. The wire gauge for the terminal block should be in the range of 12 ~ 24 AWG@25°C.
2. When performing any of the procedures like inserting the wires or tightening the wire-clamp screws,
make sure the power is OFF to prevent from getting an electric shock.
Figure 2-1: IXT-900 Series Upper Panel
1 2 3
DC 1
Figure 2-2 6-Pin Terminal Block Power Wiring Input
Positive (+) Pin Negative (-) Pin
Pin 1/5 Pin 2/6
Pin 1/5 Pin 2/6
Pin 1/5 Pin 2/6
Pin 1/5 Pin 2/6
24
User's Manual of IXT-900 Series
4 5 6
DC 2
Input Voltage
DC 9~48V, AC 24V
DC 9~48V, AC 24V
DC 9~48V, AC 24V
DC 9~48V, AC 24V