Table of Contents
Advertisement
2.1.1 LED Indicators
LED
Color
P1
Green
Green
P2
Green
FAULT
Fiber
Green
LNK /ACT
TP 1000
Green
TP
LNK /ACT
To press and release the RESET button. The IGT-90X will back to the factory default mode. Be sure that you
backup the current configuration of IGT-90X; else the entire configuration will be erased when pressing the
"RESET" button.
• Press and release the RESET button shortly, the device will be rebooted.
• Press the RESET button about 10 seconds and release, the device will back to the factory default
mode; the entire configuration will be erased to default setting.
2.1.2 IGT-90X Rear Panel
The upper panel of the Industrial Managed Media Converter consist one terminal block connector within two DC power
inputs.
Figure 2-6
shows the upper panel of the Industrial Managed Media Converter.
IGT-90X series Upper Panel
■
Function
Lit
Indicate the power 1 has power.
Lit
Indicate the power 2 has power.
Lit
Indicate the either power 1 or power 2 has no power.
To indicate that the Fiber Optical Port is successfully connecting to the
Lights
network at 1000Mbps.
Blinks
To indicate the Fiber Optical Port is receiving or sending data.
To indicate that the Gigabit Ethernet Port is successfully connecting to the
Lights
network at 1000Mbps. OFF indicate the Gigabit Ethernet Port is
successfully connecting to the network at 10/100Mbps.
To indicate that the Gigabit Ethernet Port is successfully connecting to the
Lights
network at 10/100/1000Mbps.
Blinks
To indicate the Gigabit Ethernet Port is receiving or sending data.
Figure 2-6 Upper Panel of IGT-90X
-11-
User's Manual of IGT-90x
Advertisement
Table of Contents
