Snmp Access Group - Planet IXT-900 Series User Manual

4.2.4.5 SNMP Access Group

Configure SNMPv3 access group on this page. The entry index keys are Group Name, Security Model and Security Level.
The SNMPv3 Access Group Setting screens in
The page includes the following fields:
Object

Group Name

Security Model

Security Level

Read View Name
 Write View Name
 Notify View Name
Buttons
: Click to add a new access entry.
: Check to delete the entry.
Figure 4-2-27
Figure 4-2-27 SNMPv3 Access Group Setting Screenshot
Description
A string identifying the group name that this entry should belong to.
The allowed string length is 1 to 16.
Indicates the security model that this entry should belong to.
Possible security models are:
 v1: Reserved for SNMPv1.
 v2c: Reserved for SNMPv2c.
 V3: Reserved for SNMPv3 or User-based Security Model (USM)
Indicates the security model that this entry should belong to.
Possible security models are:
 Noauth: None authentication and none privacy security levels are
assigned to the group.
 auth: Authentication and none privacy.
 priv: Authentication and privacy.
Note: The Security Level applies to SNNPv3 only.
Read view name is the name of the view in which you can only view the contents of
the agent.
The allowed string length is 1 to 16.
Write view name is the name of the view in which you enter data and configure the
contents of the agent.
The allowed string length is 1 to 16.
Notify view name is the name of the view in which you specify a notify, inform, or trap.
User's Manual of IXT-900 Series
and Figure 4-2-28 appear.
67