Removing The Sfp/Sfp+ Transceiver - Planet IXT-900 Series User Manual

2.3.2 Removing the SFP/SFP+ Transceiver

Make sure there is no network activity by consulting or checking with the network administrator. Or through the
1.
management interface of the media converter/converter (if available) to disable the port in advance.
Remove the fiber optic cable gently.
2.
Turn the lever of the SFP transceiver to a horizontal position.
3.
Pull out the module gently through the lever.
4.
Never pull out the module without pulling the lever or the push bolts on the module. Directly pulling
out the module with force could damage the module and SFP module slot of the device.
User's Manual of IXT-900 Series
32