3.2 LED Definition:
System
LED
Color
P1
Green
P2
Green
Alarm
Red
PoE Usage
Amber
Gigabit TP Interface
LED
Color
TP LNK/ACT
Green
PoE-in-Use
Amber
10
Function
Lights to indicate DC power input 1 has power.
Lights to indicate DC power input 2 has power.
Lights to indicate that DC power has failed.
IGUP-1205AT (30W, 60W, 90W)
Lights to indicate the system consumes over 30-/60-
/90-watt PoE power budget.
Blinks to indicate the system consumes less than
30-/60-/90-watt PoE power budget.
IGUP-2205AT (60W, 120W, 180W)
Lights to indicate the system consumes over 60-/120-
/180-watt PoE power budget.
Blinks to indicate the system consumes less than
60-/120-/180-watt PoE power budget.
Function
Lights to indicate that the copper port is successfully
connecting to the network at 10/100/1000Mbps.
Blinks to indicate the copper port is receiving or
sending data.
Lights to indicate that the port is providing inline
power to remote powered device.
Off to indicate that the port is not providing inline
power to remote powered device.