Disabling Protocols: Phaserlink Printer Management Software - Tektronix Phaser 850 Setup Manual

Disabling protocols: PhaserLink Printer
Management Software
1.
Connect to the printer via PhaserLink (see Accessing the printer from a browser on
page 33).
2. On the left side of any PhaserLink page, click Settings.
3. In the INTERFACES group, click the link for the protocol you want to disable; this
displays the page for that protocol.
4.
At the top of the page is a field labeled with the name of the protocol; to disable the
protocol, select Disabled, then click Apply at the bottom of the page.
Networking Setup Guide
Disabling and Enabling Protocols
43