Configuring The Printer's Serial Port For A Pc - Tektronix PHASER 560 Service Manual

2
Installing the Printer and Drivers
Configuring the printer's serial port for a PC
2-38 Phaser 560 Color Printer
Downloaded from www.Manualslib.com
Use the PostScript command file DEVPARAM.PS (located on the Printers
Utilities diskette) to modify the printer's serial port settings.
The following example sets flow control to Xon/Xoff, parity to none, data bits to 8,
stop bits to 2 and the baud rate to 9600. In the example below, the changes are
persistent across print jobs and across power cycles; they remain in effect until
specifically changed again.
CTRL-D
systemdict/languagelevel known{languagelevel 2 eq
{true (0) startjob dup not
{/exitserver errordict /invalidaccess get exec}
if}{false}ifelse}{false}ifelse
not {quit} if
(%Serial_NV%)
/FlowControl
/Parity
/DataBits
/StopBits
/Baud
false (0) startjob pop
CTRL-D
Note CTRL-D is the ASCII End-Of-Text (EOT) character.
manuals search engine
<</Password (0)
/X0nXoff
/None
8
2
9600 >> setdevparams