Connecting A Foot Switch; Midi Connections; Connecting A Set Of Headphones - Hammond M-SOLO Reference Manual

Hide thumbs Also See for M-SOLO:

Table of Contents

Introduction

Connecting a Foot Switch

You can connect an optional foot switch such as the Hammond model FS-9H foot switch

to your M-solo. Connect the foot switch plug to the jack marked LESLIE FAST on the back

of the M-solo.

NOTE: In order to insure proper operation of the Foot Switch, be sure to connect it when the power to the M-solo is "OFF."

Your M-solo can interface with a great number of MIDI-compatible devices. See the MIDI chapter of this

Guide for more information about MIDI connections and your Hammond M-solo.

A stereo headphone jack is provided on the Accessory Panel next to the LINE OUT jacks so that

you can play or practice in privacy. Connect the plug from a set of stereo Headphones into the

Headphone jack.

NOTE: Be sure that your headphone set has either a ¼" plug or an adapter for a ¼" plug.

HA<O>

M-solo Reference Guide

Table of Contents