Table of Contents
Advertisement
- - - - - - - -
TO REMJVE PEDAL SWITCH:
1)
To service the pedal switch it may be necessary to loosen the pedal switch
cables at the rear of the console that are routed through an access hole
in the bottom shelf.
Also, it may be necessary to disconnect the ground
wire on the pedal switch from the ground lug assembly on the bottom shelf
at the rear of the console.
2)
Insert a screwdriver in between the pedal switch chassis and the bottom
support rail, as shown in Figure F.
Gently pry the pedal switch upward
to unlock the studs on the pedal switch from the support rail locks, as
-----
shown in Figure F, Number 1.
3)
When the pedal switch unlocks from the support rail, grasp the pedal
switch and gently pull it away from the console to release the pedal
switch studs from the rear locks on the support rail, as shown
in
Figure F, Number 2.
4)
To service the pedal switch it may be necessary to unplug the pedal
cables from the pedal switch and remove it from the console.
To
reconnect the pedal cables to the pedal switch, as viewed from the front
of the console, Plug 552 is connected to the right Plug and Plug 553 is
connected to the Plug on the left.
o
BOTTOM
FRONT
VIEW
I
j
2-4 I
34J107
P,~ELHlI,~ARY
Hide quick links:
Advertisement
Table of Contents
