Creating A New User Patch - Hammond M-SOLO Reference Manual

8. Now Press Patch button 3.
9. Play some notes. You will now hear a typical synthesizer setting.

Creating a New User Patch

You can create and Record your own User Patches with your own settings.
TRY THIS:
1 Press the MANUAL button. This will disable Patches so that you can create an entirely new
Patch.
2. Make whatever changes you wish.
3. When you have completed your edits, Press and Hold the SYSTEM [RECORD] button.
4. While holding the SYSTEM [RECORD] button, press one of the three PATCH buttons. You will
see the LED of the PATCH button you selected flash "ON" and "OFF" for approximately 2
seconds.
After the LED stops flashing, your new Patch has been Recorded.
Patches
HA<O>
M-solo Reference Guide
41