Foot Controls; Expression Pedal; Leslie Foot Switch - Hammond Skx Quick Start Manual

6. Foot Controls

If you wish to hook up an Expression Pedal, Leslie Speed Switch, Sustain/Damper Pedal or all
three, here's how.
Expression (Volume) Pedal
We highly recommend the Hammond EXP-50 Expression/Volume Pedal. It has a heavy-duty metal
construction, and has the familiar feel and distinctive response curve of a vintage B-3 Pedal that you
just cannot find in aftermarket volume pedals. just plug it in to the EXP PEDAL jack on the back of
the SKX. If you choose not to use the EXP-50, you can use most any after-market Expression
Pedal, providing it has a tip-ring-sleeve (or "stereo") plug. An audio volume pedal will not work when
connected to the EXP PEDAL jack.

Leslie Foot Switch

Many like to use a foot switch to control Leslie Speed. Use our FS-9H plugged into the FOOT SW
jack on the rear of the SKX.
Most likely you will want a Sustain or Damper Pedal. Simply position or damper, and we offer our
FS-9H. just position where you want it on the floor, and connect the cable to the DAMPER PEDAL
jack located on the back of the SKX. Many aftermarket sustain-type pedals will also work with the
SKX.