Table of Contents
Advertisement
70
Using Memory
RESTORING FACTORY SETTINGS
If you have made changes to the M-solo and want to restore the factory settings, follow the procedure
below.
NOTE:
Restoring the factory settings will erase any changes you have made.
recommended to make a backup copy of your changes before doing this procedure. Please consult page
69 for instructions on how to create a Backup File.
To restore the M-solo to factory settings, do the following:
1.
Make sure the power to the M-solo is "OFF."
2.
Press and Hold the DELAY/REVERB ON button.
3.
While holding the DELAY/REVERB ON button, press the POWER button to turn the M-solo
"ON." The LED of the DELAY/REVERB ON button will blink.
4.
Release the DELAY/REVERB ON button.
After the instrument finishes booting, the factory settings will be restored.
HA<O>
M-solo Reference Guide
Therefore it is
Advertisement
Table of Contents
