Table of Contents
Advertisement
60
MIDI
MIDI Receiving Channel
To set the MIDI Receiving Channel, do the following:
1.
With the power to the instrument "ON," press the SYSTEM button. The LEDs on the
instrument will start flashing.
2.
Press the PERCUSSION ON button. The LED to the left of V-3 will light and the LED of the
PERCUSSION ON button will stop flashing and light continuously. The other LEDs will
continue to flash.
3.
Use the bottom octave of the keyboard to select the MIDI Receiving Channel. Press the key
which represents the value you want. The six LEDs of the VIBRATO & CHORUS Mode will
light in accordance with the value you selected.
4.
After you have made your selection, press the SYSTEM button to turn it "OFF" (LED not lit).
The M-solo will now receive MIDI data on the Channel you selected.
NOTE: This Parameter affects all Instrument Types.
HA<O>
M-solo Reference Guide
VIBRATO & CHORUS LEDs
Key Number
0
No LEDs lit
1*
V-3 LED lit
2
V-3 & C-3 LEDs lit
3
V-3, C-3 & V-1 LEDs lit
4
V-3, C-3, V-1 & C-1 LEDs lit
5
V-3, C-3, V-1, C-1 & V-2 LEDs lit
6
All six LEDs lit
*default setting
LED
MIDI Receiving Channel
No MIDI data is received
MIDI Channel 1
MIDI Channel 2
MIDI Channel 3
MIDI Channel 4
MIDI Channel 5
MIDI Channel 6
Advertisement
Table of Contents
