Table of Contents
Advertisement
48
Special Performance Features
KEY CLICK LEVEL
This Parameter allows you to adjust the amount of Key Click - both the rate of Attack (when a key is
depressed) and Release (when the key is released).
1.
With the power to the instrument "ON," press the SYSTEM button. The LEDs on the
instrument will start flashing.
2.
Press the LESLIE BYPASS button. The LED of the LESLIE BYPASS button will stop flashing and
light continuously. The other LEDs will continue to flash.
3.
Use the bottom octave of the keyboard to select the amount of Key Click. You can select from
1 (soft) to 6 (loud) as well as 0 (no Key Click). Press the key which represents the value you
want. The six LEDs of the VIBRATO & CHORUS Mode will light in accordance with the value
you selected.
4.
After you have made your selection, press the SYSTEM button to turn it "OFF" (LED not lit).
The Key Click will sound at the level you selected.
NOTE: This Parameter is available for the B-3, Vx, Farf and Ace Instrument Types.
NOTE: This Parameter setting can be Recorded as part of a Patch or in the MANUAL button.
HA<O>
M-solo Reference Guide
VIBRATO & CHORUS LEDs
Key Number
LED
0
No LEDs lit
1
V-3 LED lit
2
V-3 & C-3 LEDs lit
3*
V-3, C-3 & V-1 LEDs lit
4
V-3, C-3, V-1 & C-1 LEDs lit
5
V-3, C-3, V-1, C-1 & V-2 LEDs lit
6
All six LEDs lit
*default setting
Key Click Level
No Key Click.
Very soft Key Click.
Soft Key Click.
Moderately soft Key Click.
Moderately loud Key Click.
Loud Key Click.
Maximum Key Click.
Advertisement
Table of Contents
