Table of Contents
Advertisement
RESTORING FACTORY SETTINGS
WARNING: Doing the following will erase any changes you have made and reload the factory settings to the
instrument. If you have made changes that you want to preserve, Save your changes as a Setup file to your
computer before doing the following procedure. For information on how to back up a Setup file to your computer
please consult the USING MEMORY chapter of this Guide starting on page 69.
If you have made changes to the instrument, such as creating and Recording your own User Patches, and
you want to restore the M-solo to its factory settings, do the following:
1.
Turn the power to the instrument "OFF."
2.
2 Press and Hold the DELAY/REVERB ON button.
3.
While continuing to hold the DELAY/REVERB ON button, press the POWER button to turn the
power to the M-solo "ON."
4.
Release the DELAY REVERB button when its LED starts blinking.
When the LED stops blinking, the factory settings have been restored.
Special Performance Features
HA<O>
M-solo Reference Guide
53
Advertisement
Table of Contents
